I had an issue with Doom 2 if I had both the Midi IN and Midi Out cables connected to my Midi Module, for whatever reason. Just unhook the PC's MIDI IN; you don't need the PC to get MIDI data from the module. See if that helps. PROTIP! A++ That fixed my issue. I was getting a wee bit frustrated …

I have an MT-32 old and I mainly still use my SC-55 mkII for games. Keep this sc55!

This will be super useful as I have a huge variety of creative cards across my multiple systems! Thanks for sharing! I will place these in my archive! A++

HOLY SCHNIKES!! That dust! Good to see you got the old gal cleaned up and running better! Its crazy how it only has 1 ram slot but really cool it has a zif socket! I generally use peroxide cream from a beauty supply store when restoring plastics. :3

I have a Shuttle HOT-409 and naturally the old battery for CMOS has long since leaked and been removed. There is a external battery connector with 4 pins on this board I would like to utilize with a battery holder and AA batteries. I have looked around for a pin-out of this header but I am unable …

I don't see an external battery connector. J1 is a jumper, you don't connect a battery there. However, if there indeed is one, normally only pins 1 and 4 are used. Check which pin connects to GND and you have it (the other is plus then, of course). As for voltage, most RTCs can work with anything …

I could try it out on my 486dx2 when I get time if youd like. Its a DOS 6.22 machine.

You could also look into a SC-55. It has limited MT-32 backwards compatibility and is a very good unit.

I have a Shuttle HOT-409 and naturally the old battery for CMOS has long since leaked and been removed. There is a external battery connector with 4 pins on this board I would like to utilize with a battery holder and AA batteries. I have looked around for a pin-out of this header but I am unable to …

Matsushita? Are you sure that drive wasn't using the Panasonic interface? I want to say that interface was practically gone around the time of 4x drives, but I can't quite remember. Meanwhile, CT2950 is full plug and play, right? (IDE interface in addition to the PnP Sound settings) In this case, …

Looking for any tips anyone has on using the IDE interface on a ct2950 to run a matsushita 8x cd drive. None of the sb16 installers ive found have any kind of IDE driver. I am at a loss of how to get this IDE interface to work with this CD drive. Any help would be appreciated!