Re: Is this soundcard worth saving?
Posted on 2022-11-16, 09:39
Sent PM to RaiderOfLostVoodoo.
Is this soundcard worth saving?
Posted on 2022-11-15, 21:56
Today I had a day off and I finally started going through the collection of (mostly ISA) soundcards I have collected over the past 15 years or so. Besides a whole box full of Creative Sound Blaster cards (ranging from SB 1.5 to SB AWE64) there were a few Aztech cards and also the card in the photos. …
Re: Gravis Ultrasound Memory Upgrade
Posted on 2022-08-26, 09:21
kalgon wrote on 2022-08-24, 11:23: It's a GUS Max 2.1. Then these should probably work just fine!
Re: WaveBlaster daughterboard dimensions - what was the largest?
Posted on 2021-03-02, 21:02
When using standoffs, the hole closest to the waveblaster connector is not used in most cases (the Turtle Beach Rio is an exception; it comes with four standoffs which are not in my photos on https://waveblaster.nl ). I once measured the Roland SCB-55, which is 138.4 x 89.9 mm. This is one of the …
Re: MT-32, Putzlowitschs MIDI Mapper and Roland Um-One vs MS GS Wavetable Synth
Posted on 2021-02-04, 08:29
Salient wrote on 2021-02-03, 06:01: This is what I use: http://coolsoft.altervista.org/en/midimapper It works great. I second that! A new version was just released.
Re: Do I need a Yamaha FX or Dreamblaster X2 for playing DOS games ?
Posted on 2021-02-03, 07:53
Serdashop still has a special bundle on sale with 4 (yes, four!) wavetable boards: https://www.serdashop.com/BlackFridayWaveblasterBundle
Re: Windows 10 stops detecting Munt.
Posted on 2021-02-02, 20:41
I downloaded and installed Munt 2.4.0.2 (x64) a few days ago and that appears to work just fine on Windows 10 20H2.
Re: Do I need a Yamaha FX or Dreamblaster X2 for playing DOS games ?
Posted on 2021-02-02, 20:40
Intel486dx33 wrote on 2021-01-30, 14:44: Hi, Do I need a a Yamaha FX or DreamBlaster X2 Wave table for playing DOS games or is it just for recording ? I think the OP meant Yucatan FX instead of Yamaha FX. Another great MIDI daughterboard from Serdaco.
Re: MT-32 wavetable daughterboard exist
Posted on 2021-01-05, 21:32
I was told by the initiator and sponsor of this project that the parts were extremely difficult to source and come mainly from China. A significant amount of time and money was invested. He actually had several other daughterboards (including SCC-1 and SCC-1A versions) and several ISA soundcards …
Re: MT-32 wavetable daughterboard exist
Posted on 2021-01-03, 21:06
... a DIY waveblaster daughterboard which seeems to be fully compatible with MT-32 ... See: http://members.home.nl/c.kersten/ It says "And just today two more, very special new boards arrived from the same source: LAPC on a MIDI daughterboard! It must have been especially difficult sourcing those …
Re: Windows 10 stops detecting Munt.
Posted on 2020-12-01, 21:24
The repair fixes it for me, but only until the next reboot of Windows 10.... I hope there will be an updated version.
Re: All you retail boxes lovers - meet the Aureal SQ3500 Turbo retail packaging!
Posted on 2020-10-18, 20:22
Looking great, would love to see some photos of the end result. Keep us posted!
Re: Difference between Ensoniq Soundscape ROMs?
Posted on 2020-10-17, 12:06
...but at an analog level something very different is going on, with yours being more bass-heavy with less clarity in the top. Could this be the sound card? (SB16 filtering?) FYI: the Ensoniq DB was on a Serdaco MIDI Interface Board 'CHiLL' (that has a very clear output), recording was done using a …
Re: Difference between Ensoniq Soundscape ROMs?
Posted on 2020-10-13, 18:59
So I made recordings of both my Ensoniq DB revisions A and B. During recording I noticed that the signal level on the right channel of the rev A board was rather low, much lower than the left channel. I suppose there is some kind of malfunction or bad part in the analog section of the board. However …
Re: Difference between Ensoniq Soundscape ROMs?
Posted on 2020-10-11, 16:08
As I have a rev B DB, I can make a recording or two. Same Doom track?
Re: Turtle Beach Tropez Plus MIDI in Windows
Posted on 2020-09-14, 13:53
Can't say that I know how to fix that. Documentation says: Compatibility * Windows 95 Plug'n'Play * SoundBlaster and SoundBlaster Pro compatible * MPU-401 compatible MIDI interface (DOS and Windows) That might just mean that you can use the Game/MIDI port as an MPU-401 in DOS (or possibly in a DOS …
Re: Turtle Beach Tropez Plus MIDI in Windows
Posted on 2020-09-13, 18:52
Which version of Windows are you using?
Re: Turtle Beach Cancun FX
Posted on 2020-08-20, 07:14
It is indeed just a check. As long as the installation runs after that, you're fine. Unfortunately the serial number on the cd inlay either was never printed on it or the ink disappeared throughout the years. I just tried installing with the serial number from my other Turtle Beach products and …
Re: Bought these (retro) hardware today
Posted on 2020-07-19, 12:29
Picked up a Leadtek Winfast A250 Ultra. Didn't have the Full cooler like the original. I also had a Passive Zalman Cooler BNIB so i proceeded to fit that. Now it looks just like mine! The original cooler on mine was failing, so I sent it in for replacement and they sent me a cooler similar to yours …
Re: DFI Lanparty NF4 issues
Posted on 2020-07-09, 10:41
Did you check the caps on the mainboard? My DFI NF4 Expert has one bulging cap and it still works OK, but you may want to check yours.
Page 1 of 9